Введение
Use this guide to replace the regulator assembly in your Titan Elite 3000 High Pressure Airless Sprayer.
Выберете то, что вам нужно
-
-
Turn off and unplug the sprayer.
-
Lay the sprayer down horizontally before continuing.
-
-
-
Use a pick tool to scrape the red paint from the side of the pressure control knob.
-
-
-
-
Use a flathead screwdriver to pry and remove the clip securing the stop sleeve.
-
-
-
Use an adjustable wrench to remove the regulator assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
4 участников успешно повторили данное руководство.
