To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws. Gently lift the panel off.
  • To expose the hard drive, use a bit driver and a Star #0 bit to remove the two designated screws.

  • Gently lift the panel off.

Добавить комментарий

With the panel removed, slide the hard drive towards the top of the netbook with moderate force. This will free the hard drive from its original location.
  • With the panel removed, slide the hard drive towards the top of the netbook with moderate force.

  • This will free the hard drive from its original location.

Добавить комментарий

Obtain a new hard drive. Apply firm pressure to secure the new hard drive into the old hard drive's location.
  • Obtain a new hard drive.

  • Apply firm pressure to secure the new hard drive into the old hard drive's location.

Добавить комментарий

Place the back panel in its original position. Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.
  • Place the back panel in its original position.

  • Using the bit driver and Phillips #0 bit, secure the hard drive panel to the netbook body.

Добавить комментарий

Finish Line

One other person completed this guide.

Mason McCaskill

Member since: 18.10.2013

943 Репутация

Автор 9 руководств

Команда

Clemson, Team 14-2, Benson Fall 2013 Member of Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 членов

Автор 9 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 3

За 7 дней: 12

За 30 дней: 29

За всё время: 1,590