1. Use a bit driver and a Phillips #0 bit to remove the one 5 mm retaining screw.
    • Use a bit driver and a Phillips #0 bit to remove the one 5 mm retaining screw.

    • Lift the panel up and out of the way.

    Добавить комментарий

  2. The RAM chip is secured by two retaining arms that run parallel with the chip. Gently pull these arms in opposite directions off of the chip.
    • The RAM chip is secured by two retaining arms that run parallel with the chip. Gently pull these arms in opposite directions off of the chip.

    • After the retainer arms are free, push the chip towards the top of the netbook. This will free the chip for removal.

    Добавить комментарий

  3. Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
    Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
    • Push the replacement RAM into the original position.

    • Reattach both securing arms onto the sides of the RAM chip.

    Добавить комментарий

    • Place the panel back into the securing slots and let it rest in its original position.

    • With the bit driver and Phillips #0 bit, secure the panel down with one screw.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Mason McCaskill

Участник с: 18.10.2013

943 Репутация

Автор 9 руководств

Команда

Clemson, Team 14-2, Benson Fall 2013 Member of Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 членов

Автор 9 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 6

За всё время: 288