Перейти к основному содержанию
  1. Remove the 5.75 mm screw from the cover panel. Turn the laptop over with the screen facing down.
    • Remove the 5.75 mm screw from the cover panel.

    • Turn the laptop over with the screen facing down.

  2. Lift up the cover panel using a plastic opening tool.
    • Lift up the cover panel using a plastic opening tool.

  3. Match the notch on the left of the gold edge of the memory with the notch of the laptop.
    • Match the notch on the left of the gold edge of the memory with the notch of the laptop.

    • Insert the memory into the slot.

  4. Push down on the memory gently until it clicks into place.
    • Push down on the memory gently until it clicks into place.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Garrett Gudgel

Участник с: 05.10.2010

747 Репутация

Автор 13 руководств

Команда

Cal Poly, Team 4-43, Amido Fall 2010 Member of Cal Poly, Team 4-43, Amido Fall 2010

CPSU-AMIDO-F10S4G43

5 членов

Автор 13 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 4,523