Введение

Here, using a Phillips screwdriver, and a plastic opening tool, you will learn how to clean the fan in your computer.

Запчасти

Никакие детали не требуются.

Click button 1 to the unlocked position.
  • Click button 1 to the unlocked position.

  • This button will have a 1 by it.

Добавить комментарий

Push and hold button 2 to the left.
  • Push and hold button 2 to the left.

  • As you push button 2 to the left position, simultaneously lift up the battery pack.

  • This button will have a 2 by it.

Добавить комментарий

  • Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.

Добавить комментарий

  • Remove the one 2.5mm Phillips #1 middle plate screw.

Добавить комментарий

  • Lift up the middle vent panel.

  • Set the panel to the side.

Добавить комментарий

  • Using the plastic opening tool, remove the outer panel and set to the side.

  • Be careful not to break the back of the computer.

Добавить комментарий

  • Using a Phillips #1 screwdriver, remove the one 1.5mm screw.

Добавить комментарий

  • Lift the fan up and blow compressed air or replace with a new one.

  • Blow compressed air into the spirals in the middle of the fan.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Amber van Solingen

Участник с: 29.01.2018

630 Репутация

Автор 6 руководств

Команда

University of Alabama, Team S3-G11, Bedsole Spring 2018 Member of University of Alabama, Team S3-G11, Bedsole Spring 2018

UA-BEDSOLE-S18S3G11

3 членов

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 3

За 30 дней: 10

За всё время: 68