Введение
Use this guide to replace a defective USB, HDMI, and audio jack circuit board in your Toshiba E45t-B4300.
Выберете то, что вам нужно
-
-
Remove the following twelve 4mm screws with a Phillips #0 screwdriver.
-
-
-
Инструмент, используемый на этом этапе:Plastic Cards$2.99
-
Run the spudger or a plastic card around the entire laptop to release the rest of the clips.
-
-
-
Use the point end of the spudger to lift the clips that attach the two ribbons to the motherboard.
-
Pull out the ribbons from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команду
USF Tampa, Team S2-G2, Sullivan Spring 2017 Участник USF Tampa, Team S2-G2, Sullivan Spring 2017
USFT-SULLIVAN-S17S2G2
3 членов
Автор 12 руководств
