Перейти к основному содержанию

Введение

The RAM is an essential part of the computer that helps it run. Without the RAM, the computer will be slower and will not have as much memory. This guide will give the steps necessary to replace the RAM.

Запчасти

No parts specified.

  1. Unscrew the 4mm screw from the middle panel using a Phillips #1.
    • Unscrew the 4mm screw from the middle panel using a Phillips #1.

  2. Lift up on the middle panel and remove it.
    • Lift up on the middle panel and remove it.

  3. Pull the right clip to the right and left clip to the left using your right and left hands respectively.
    • Pull the right clip to the right and left clip to the left using your right and left hands respectively.

  4. Once the clips have been removed, the RAM will pop up.
    • Once the clips have been removed, the RAM will pop up.

  5. Slide the RAM out of its position and remove it.
    • Slide the RAM out of its position and remove it.

Заключение

To reassemble your device, follow these instructions in reverse order.

4 участников успешно повторили данное руководство.

NateJohnson

Участник с: 26.01.2014

985 Репутация

Автор 5 руководств

Команда

Cal Poly, Team 9-26, Maness Winter 2014 Member of Cal Poly, Team 9-26, Maness Winter 2014

CPSU-MANESS-W14S9G26

4 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 4

За всё время: 1,202