Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

Learn to replace your wifi card.

Запчасти

Детали не указаны.

  1. Remove the panel screw labeled with a #1 Phillips head screwdriver  as indicated in the picture, then use a flat edge tool to pry the cover off. The hardware to the left (labeled) can be easily removed by disconnecting the black and white wires and pushing the tabs that secure it (located on the side) outwards. Pull the Wi-Fi card out from the device at a slight angle (horizontal with the casing).
    • Remove the panel screw labeled with a #1 Phillips head screwdriver as indicated in the picture, then use a flat edge tool to pry the cover off.

    • The hardware to the left (labeled) can be easily removed by disconnecting the black and white wires and pushing the tabs that secure it (located on the side) outwards.

    • Pull the Wi-Fi card out from the device at a slight angle (horizontal with the casing).

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Sophie Schneider

Участник с: 15.04.2010

82 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 10-42, Garner Spring 2010 Участник Cal Poly, Team 10-42, Garner Spring 2010

CPSU-GARNER-S10S10G42

5 членов

Автор 10 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 2

За всё время: 4,395