Перейти к основному содержанию

Введение

Learn to replace your wifi card.

Запчасти

No parts specified.

  1. Remove the panel screw labeled with a #1 Phillips head screwdriver  as indicated in the picture, then use a flat edge tool to pry the cover off. The hardware to the left (labeled) can be easily removed by disconnecting the black and white wires and pushing the tabs that secure it (located on the side) outwards. Pull the Wi-Fi card out from the device at a slight angle (horizontal with the casing).
    • Remove the panel screw labeled with a #1 Phillips head screwdriver as indicated in the picture, then use a flat edge tool to pry the cover off.

    • The hardware to the left (labeled) can be easily removed by disconnecting the black and white wires and pushing the tabs that secure it (located on the side) outwards.

    • Pull the Wi-Fi card out from the device at a slight angle (horizontal with the casing).

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Sophie Schneider

Участник с: 15.04.2010

82 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 10-42, Garner Spring 2010 Member of Cal Poly, Team 10-42, Garner Spring 2010

CPSU-GARNER-S10S10G42

5 членов

Автор 10 руководств

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

За всё время: 4,393