Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

The bulb of a projector is only rated for a certain amount of hours, so when it reaches the end of its life the image will become fuzzy and eventually die out. This guide will show how to replace the bulb on this projector.

Запчасти

  1. Remove the two screws from the bottom plate as shown. Remove the two screws from the bottom plate as shown.
    • Remove the two screws from the bottom plate as shown.

  2. Remove the two screws on the bulb housing.
    • Remove the two screws on the bulb housing.

  3. Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out. Replace the bulb with an equivalent one.
    • Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out.

    • Replace the bulb with an equivalent one.

Заключение

To reassemble your device, follow these instructions in reverse order.

Bryan Underwood

Участник с: 02.04.2018

697 Репутация

Автор 5 руководств

Команда

University of Memphis, Team S1-G3, Kim Spring 2018 Участник University of Memphis, Team S1-G3, Kim Spring 2018

UM-KIM-S18S1G3

3 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 87