Перейти к основному содержанию

Toy Lightsaber Battery Replacement

Выберете то, что вам нужно

  1. Toy Lightsaber Battery Replacement, Battery: шаг 1, изображение 1 из 3 Toy Lightsaber Battery Replacement, Battery: шаг 1, изображение 2 из 3 Toy Lightsaber Battery Replacement, Battery: шаг 1, изображение 3 из 3
    • Remove the Lightsaber blade by carefully twisting it off the hilt.

    • Be gentle during this process to avoid damaging the blade or the hilt.

  2. Toy Lightsaber Battery Replacement: шаг 2, изображение 1 из 3 Toy Lightsaber Battery Replacement: шаг 2, изображение 2 из 3 Toy Lightsaber Battery Replacement: шаг 2, изображение 3 из 3
    • Use a Phillips #2 screwdriver to remove the 3.5 mm screws on the hilt.

  3. Toy Lightsaber Battery Replacement: шаг 3, изображение 1 из 3 Toy Lightsaber Battery Replacement: шаг 3, изображение 2 из 3 Toy Lightsaber Battery Replacement: шаг 3, изображение 3 из 3
    • Remove the old C batteries.

    • If the batteries were leaking, be sure you thoroughly clean the inside of the hilt with a pair of tweezers to scrape off the battery acid and wipe away any acid that remains with a tissue or napkin.

    • Battery acid is toxic and dangerous for your health. Wear gloves to protect yourself.

  4. Toy Lightsaber Battery Replacement: шаг 4, изображение 1 из 3 Toy Lightsaber Battery Replacement: шаг 4, изображение 2 из 3 Toy Lightsaber Battery Replacement: шаг 4, изображение 3 из 3
    • Place the new C batteries inside the newly cleaned hilt.

  5. Toy Lightsaber Battery Replacement: шаг 5, изображение 1 из 3 Toy Lightsaber Battery Replacement: шаг 5, изображение 2 из 3 Toy Lightsaber Battery Replacement: шаг 5, изображение 3 из 3
    • Use your Philips #2 screwdriver to screw the 3.5 mm screws back into the hilt.

  6. Toy Lightsaber Battery Replacement: шаг 6, изображение 1 из 3 Toy Lightsaber Battery Replacement: шаг 6, изображение 2 из 3 Toy Lightsaber Battery Replacement: шаг 6, изображение 3 из 3
    • Lastly, twist the Lightsaber blade back on top of the hilt.

    • Press the red button on the hilt to test if the blade glows.

    • If the blade doesn't glow, start over and try again with different C batteries.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Zachary Adaes

Участник с: 03/22/21

133 Репутация

1 руководство автора

Команда

UMass Dartmouth, Team S3-G1, Saloman Spring 2021 Участник UMass Dartmouth, Team S3-G1, Saloman Spring 2021

UMASSD-SALOMAN-S21S3G1

1 член

Автор 1 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 3

За последние 7 дней: 18

За последние 30 дней: 72

За всё время: 3,558