Skip to main content

Введение

This is a repair guide for battery replacement.

  1. To reach the battery, follow steps 1 through 3 in the Tungsten E Teardown
  2. Begin to pry up the battery.  It is fastened to the mother board using two sided tape.
    • Begin to pry up the battery. It is fastened to the mother board using two sided tape.

    • Caution: the battery is connected by two wires.

  3. iPhone Battery Fix Kits

    Only $29.99

    Buy Now

    iPhone Battery Fix Kits

    Only $29.99

    Buy Now
  4. Remove the battery
    • Remove the battery

    • Caution: Be careful not to tear the wires when removing battery.

  5. Using a soldering iron, disconnect the battery wires.
    • Using a soldering iron, disconnect the battery wires.

    • Note: the wires are soldered to the board.

  6. Take replacement battery and solder the wires to the board.
    • Take replacement battery and solder the wires to the board.

    • Take care to match wire colors as before.

    • Use double sided tape to attach battery firmly to board.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Kathleen Hix

Участник с: 21.01.2010

49 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 13-22, Maness Winter 2010 Member of Cal Poly, Team 13-22, Maness Winter 2010

CPSU-MANESS-W10S13G22

4 членов

Автор 4 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 6

За всё время: 5,776