Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.
Введение
Use this guide to replace the battery in your Turtle Beach Ear Force Stealth 500P headphones.
Выберете то, что вам нужно
-
-
Remove the ear pad from the earphone by gently pulling the cloth pad outwards from the slot holding the cloth.
-
Work circularly until removed.
-
-
-
Using a Phillips #1 screwdriver, remove the four fastening screws that hold the blue plastic speaker mount in place.
-
Gently pull blue plastic from black housing by hand until separated.
-
-
-
Use screwdriver tip J00 to remove three screws fastening circuit board to casing.
-
-
-
-
Circuit board will be free to be removed by hand. Use plastic pry tool to slide between casing and circuit board if needed.
-
-
-
Gently removed and flip over circuit board to reveal battery pack attached to the underside. Careful not to pull out wires running through headband.
-
-
-
Use metal pry tool to slide between battery and circuit board to break up adhesive. Ensure the battery wire connector plug has been removed on front side.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
10 участников успешно повторили данное руководство.
Команда
UMass Dartmouth, Team 2-3, Shastany Fall 2015 Участник UMass Dartmouth, Team 2-3, Shastany Fall 2015
UMASSD-SHASTANY-F15S2G3
3 членов
Автор 10 руководств
3 Комментариев
Where can I get a replacement battery?
You can look on Ebay or Amazon. You can find it by searching the model number: ( FT603048P )
The costs are like $20-$30.
If you look on Ebay under: ( 3.7v 603048 ), you can get the same battery without the connector for like $5.
hey i have a question, how i can repair the mute button? It does not work.
