Введение
This step-to-step guide will serve as a guide for how to unjam an adjustable 3-hole puncher. The model for this tutorial is an S.P. Richards Company Adjustable 3-Hole Puncher. Use this guide to repair your jammed 3-hole puncher and return it to good working condition.
NOTE: Any steps after Step 2 is optional!
Выберете то, что вам нужно
-
-
Place a penny, a X-ACTO knife and a 3-hole puncher on a flat surface.
-
-
-
Grab a penny and place it between the 'jammed' puncher and place it between the bottom of the compressed spring and the washer.
-
Grip your penny firmly and compress the washer in an upward motion until you hear a 'pop' sound.
-
Your hole puncher is now unjammed.
-
-
-
-
Unscrew the head that keeps the puncher intact.
-
Use your index finger or a X-ACTO knife to move aside the puncher out of the 3-hole puncher.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
Команда
Cal Poly, Team 30-1, Green Spring 2015 Участник Cal Poly, Team 30-1, Green Spring 2015
CPSU-GREEN-S15S30G1
4 членов
Автор 7 руководств
