Введение

Hello all, today we will repair a water damaged phone.

it's a simple cell phone and quite easy to repair.

enjoy

Запчасти

Никакие детали не требуются.

Remove back cover & battery.
  • Remove back cover & battery.

Добавить комментарий

Remove the front case by prying it open. You will hear clicks.
  • Remove the front case by prying it open. You will hear clicks.

  • Be careful with taking off screen if you use a spudger.

Добавить комментарий

  • Use a Torx screwdriver to remove the screen screws.

  • Use a spudger or tweezers to remove the connector of the LCD screen.

Добавить комментарий

  • Remove keyboard by prying it open with a spudger.

  • The keyboard is secured with adhesive, be careful!

Добавить комментарий

  • The PCB board had water damage, see this in picture 3.

  • To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

Добавить комментарий

  • How and where to use the cotton swabs.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

12 участников успешно повторили данное руководство.

Kevin D

Участник с: 02.05.2014

5 618 Репутация

Автор 21 руководств

Комментариев: 2

no use .it is not switching on . replaced with good batter also. no on

nabhan75 - Ответить

try to clean with an ultrasonic bath.

measure out powerrail.

measure out the voltage coming in on board. try to see if you have short.

Kevin D - Ответить

Добавить комментарий

Просмотр статистики:

За 24 часа: 3

За 7 дней: 12

За 30 дней: 71

За всё время: 8,876