Перейти к основному содержанию

Why! WDi7SSD SSD Hard Drive Replacement

Выберете то, что вам нужно

  1. Why! WDi7SSD SSD Hard Drive Replacement, why! WDi7SSD Opening procedure: шаг 1, изображение 1 из 3 Why! WDi7SSD SSD Hard Drive Replacement, why! WDi7SSD Opening procedure: шаг 1, изображение 2 из 3 Why! WDi7SSD SSD Hard Drive Replacement, why! WDi7SSD Opening procedure: шаг 1, изображение 3 из 3
    • Make sure the computer is disconnected from the power source.

    • Flip the computer over.

    • Remove the six screws with a 2 mm Allen key.

    • Carefully remove the back panel, as well the left and right panel.

  2. Why! WDi7SSD SSD Hard Drive Replacement: шаг 2, изображение 1 из 1
    • Now flip up the base panel to which all components are attached.

  3. Why! WDi7SSD SSD Hard Drive Replacement, SSD Hard Drive: шаг 3, изображение 1 из 3 Why! WDi7SSD SSD Hard Drive Replacement, SSD Hard Drive: шаг 3, изображение 2 из 3 Why! WDi7SSD SSD Hard Drive Replacement, SSD Hard Drive: шаг 3, изображение 3 из 3
    • Using a Phillips #2 screwdriver, remove the four screws on the heatsink that cools the processor unit.

    • Remove the heatsink.

  4. Why! WDi7SSD SSD Hard Drive Replacement: шаг 4, изображение 1 из 3 Why! WDi7SSD SSD Hard Drive Replacement: шаг 4, изображение 2 из 3 Why! WDi7SSD SSD Hard Drive Replacement: шаг 4, изображение 3 из 3
    • The SSD is now visible.

    • Now flip the computer over and use the Allen wrench to loosen the 1.5 mm screws fixing the SSD.

  5. Why! WDi7SSD SSD Hard Drive Replacement: шаг 5, изображение 1 из 2 Why! WDi7SSD SSD Hard Drive Replacement: шаг 5, изображение 2 из 2
    • Disconnect the first cable from the SSD. You must press the lever down to do this.

    • The cable may not loosen easily. In this case, carefully use a little force, but not too much.

    • Pay attention do the orientation when assembling. Otherwise, the SSD and cable can be damaged.

  6. Why! WDi7SSD SSD Hard Drive Replacement: шаг 6, изображение 1 из 2 Why! WDi7SSD SSD Hard Drive Replacement: шаг 6, изображение 2 из 2
    • Disconnect the second cable from the SSD. You must press the lever down to do this.

    • The cable may not loosen easily. In this case, carefully use a little force, but not too much.

    • Pay attention do the orientation when assembling. Otherwise, the SSD and cable can be damaged.

Заключение

To reassemble the device, follow the instructions in reverse order.

Особая благодарность этим переводчикам:

de en

100%

Эти переводчики помогают нам починить мир! Хотите внести свой вклад?
Начните переводить ›

Felice Suglia

Участник с: 06/15/13

30 908 Репутация

Автор 264 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 3

За всё время: 125