Введение
This guide will demonstrate how to remove and replace the feet on the Wii Balance Board.
Выберете то, что вам нужно
-
-
Flip device upside-down so the plastic white board is facing the ground.
-
Locate the four feet in the corners of the Balance Board.
-
Unscrew the three 12.7 mm Phillips screws from each foot cover.
-
-
-
Remove the gray plastic ring from the actual foot by lifting it up.
-
-
-
-
Repeat steps two and three on the remaining four feet.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
2 Комментариев
I am in need of a foot cover. Where can I find one??
This manual did not help