Перейти к основному содержанию

WowWee MiP Robot Wheel Replacement

Выберете то, что вам нужно

  1. WowWee MiP Robot Wheel Replacement, Wheel: шаг 1, изображение 1 из 2 WowWee MiP Robot Wheel Replacement, Wheel: шаг 1, изображение 2 из 2
    • Use a metal spudger to carefully pry off the hubcap without marring the plastic wheel or hubcap.

    • This plastic material is not replaceable. Any damage will be noticeable.

  2. WowWee MiP Robot Wheel Replacement: шаг 2, изображение 1 из 2 WowWee MiP Robot Wheel Replacement: шаг 2, изображение 2 из 2
    • Remove the 12.0 mm Phillips #2 screw.

    • Hold the wheel in place, or it will rotate as you attempt to remove the screw.

  3. WowWee MiP Robot Wheel Replacement: шаг 3, изображение 1 из 1
    • Pull the wheel off of the square axle.

    • Do not use excessive force while removing the wheel. Pulling too hard on the wheel can damage the axle.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Daniel Burkholder

Участник с: 02/16/16

623 Репутация

Автор 4 руководств

Команда

USF Tampa, Team 3-4, Wollert Spring 2016 Участник USF Tampa, Team 3-4, Wollert Spring 2016

USFT-WOLLERT-S16S3G4

4 членов

Автор 10 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 4

За всё время: 809