Перейти к основному содержанию

Zig-zag Patch

Выберете то, что вам нужно

  1. Zig-zag Patch, Zig-zag Patch: шаг 1, изображение 1 из 3 Zig-zag Patch, Zig-zag Patch: шаг 1, изображение 2 из 3 Zig-zag Patch, Zig-zag Patch: шаг 1, изображение 3 из 3
    • Examine the damage. Clip any long, loose threads, and remove any debris from the hole.

    • Measure the length and width of the hole.

    • In our case it looks like 2" by 1".

  2. Zig-zag Patch: шаг 2, изображение 1 из 3 Zig-zag Patch: шаг 2, изображение 2 из 3 Zig-zag Patch: шаг 2, изображение 3 из 3
    • Grab a scrap of denim or other heavy-weight fabric and mark your measurements plus one inch in each direction.

    • In our case it will be 3" by 2".

    • Cut the scrap into a rectangle the dimensions of your new measurements.

  3. Zig-zag Patch: шаг 3, изображение 1 из 2 Zig-zag Patch: шаг 3, изображение 2 из 2
    • Insert the rectangle of fabric into the jean leg and position it under the hole.

    • Be sure that you put the rectangle of fabric in the pant leg and not behind it—you only want to work on one layer of fabric.

  4. Zig-zag Patch: шаг 4, изображение 1 из 3 Zig-zag Patch: шаг 4, изображение 2 из 3 Zig-zag Patch: шаг 4, изображение 3 из 3
    • Thread your sewing machine with your desired thread color.

    • Slide the pant leg onto the arm of the sewing machine.

    • You may need to remove the sewing machine table for the pant leg to fit over the arm.

    • Be sure that the pant leg is around the arm of the sewing machine. If both layers are stacked on one another, you will sew the pant leg shut.

  5. Zig-zag Patch: шаг 5, изображение 1 из 3 Zig-zag Patch: шаг 5, изображение 2 из 3 Zig-zag Patch: шаг 5, изображение 3 из 3
    • Check that the rectangle of fabric is still laying flat, centered beneath the hole.

    • Lower the pressor foot.

    • Sew a straight line over the hole going about five stitches past the damage.

  6. Zig-zag Patch: шаг 6, изображение 1 из 3 Zig-zag Patch: шаг 6, изображение 2 из 3 Zig-zag Patch: шаг 6, изображение 3 из 3
    • Lift the pressor foot.

    • Rotate the jean leg a few degrees toward the center of the hole.

    • Lower the pressor foot.

    • Engage the backstitch function on your sewing machine, and sew a straight line back over the hole, going about five stitches beyond the damage.

  7. Zig-zag Patch: шаг 7, изображение 1 из 3 Zig-zag Patch: шаг 7, изображение 2 из 3 Zig-zag Patch: шаг 7, изображение 3 из 3
    • Repeat steps five and six, continuing to rotate and sew lines of stitching back and forth until you cover the entire hole.

  8. Zig-zag Patch: шаг 8, изображение 1 из 2 Zig-zag Patch: шаг 8, изображение 2 из 2
    • When you are satisfied with your stitching, backstitch two or three stitches.

    • Lift the needle and pressor foot.

    • Slide the jean leg off of the sewing machine.

  9. Zig-zag Patch: шаг 9, изображение 1 из 2 Zig-zag Patch: шаг 9, изображение 2 из 2
    • Clip any dangling threads and admire your work.

  10. Zig-zag Patch: шаг 10, изображение 1 из 3 Zig-zag Patch: шаг 10, изображение 2 из 3 Zig-zag Patch: шаг 10, изображение 3 из 3
    • Still not satisfied? Alrighty, let's add some decorative stitching the other way.

    • This is completely optional. If you are happy with your work, you can stop here.

    • Slide the pant leg back onto the arm of the sewing machine, making sure that the leg goes around the arm.

  11. Zig-zag Patch: шаг 11, изображение 1 из 2 Zig-zag Patch: шаг 11, изображение 2 из 2
    • Carefully rotate the jean leg 90 degrees.

    • Be sure that there is only one layer of fabric (plus the rectangle) between the sewing machine and the needle, or else you will sew the pant leg shut.

  12. Zig-zag Patch: шаг 12, изображение 1 из 2 Zig-zag Patch: шаг 12, изображение 2 из 2
    • Lower the pressor foot.

    • Sew a straight line of stitching over the damaged area.

  13. Zig-zag Patch: шаг 13, изображение 1 из 3 Zig-zag Patch: шаг 13, изображение 2 из 3 Zig-zag Patch: шаг 13, изображение 3 из 3
    • Just like before, at the end of each line of stitching, lift the pressor foot, rotate the jeans a few degrees, and sew another line of stitching.

    • When you are happy with the way that the stitching looks, backstitch two or three stitches.

  14. Zig-zag Patch: шаг 14, изображение 1 из 2 Zig-zag Patch: шаг 14, изображение 2 из 2
    • Lift the pressor foot and needle.

    • Slide the pant leg off the arm of the sewing machine.

  15. Zig-zag Patch: шаг 15, изображение 1 из 2 Zig-zag Patch: шаг 15, изображение 2 из 2
    • Clip any dangling threads.

Заключение

Ta-da! Nice work.

7 участников успешно повторили данное руководство.

Brittany McCrigler

Участник с: 03/05/12

88 898 Репутация

Автор 131 руководств

Команда

iFixit Участник iFixit

Staff

136 членов

Автор 16 573 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 9

За последние 7 дней: 80

За последние 30 дней: 348

За всё время: 29,241