Перейти к основному содержанию

d.light Solar Lantern S2 Circuit Board Replacement

Выберете то, что вам нужно

  1. d.light Solar Lantern S2 Circuit Board Replacement, Circuit Board: шаг 1, изображение 1 из 2 d.light Solar Lantern S2 Circuit Board Replacement, Circuit Board: шаг 1, изображение 2 из 2
    • To remove the lens, three T15 x 12.5mm screws must be removed by a T15 head screwdriver.

    • The location of the other two screws are marked in red.

  2. d.light Solar Lantern S2 Circuit Board Replacement: шаг 2, изображение 1 из 3 d.light Solar Lantern S2 Circuit Board Replacement: шаг 2, изображение 2 из 3 d.light Solar Lantern S2 Circuit Board Replacement: шаг 2, изображение 3 из 3
    • After the lens has been removed the back cover needs to be removed. There are no snaps or screws holding it in place.

  3. d.light Solar Lantern S2 Circuit Board Replacement: шаг 3, изображение 1 из 1
    • Remove battery by unplugging it from the circuit board.

  4. d.light Solar Lantern S2 Circuit Board Replacement: шаг 4, изображение 1 из 2 d.light Solar Lantern S2 Circuit Board Replacement: шаг 4, изображение 2 из 2
    • Remove the circuit board by pressing on the mounting clips (shown in red circles) using the spudger.

  5. d.light Solar Lantern S2 Circuit Board Replacement: шаг 5, изображение 1 из 1
    • Desolder the wires to free the circuit board.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Jeremiah Rhoades

Участник с: 11/07/17

435 Репутация

Автор 3 руководств

Команда

IUPUI, Team S2-G3, Harley Fall 2017 Участник IUPUI, Team S2-G3, Harley Fall 2017

IUPUI-HARLEY-F17S2G3

3 членов

Автор 3 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 6

За последние 30 дней: 39

За всё время: 1,204