Перейти к основному содержанию

Изменения для Why iPhone X Face ID not work after repairing Введения

Редактировать с помощью Aiden -

Правка одобрена автор Aiden

До
После
Без изменений
Introduction
The infrared camera and dot projector as the main parts of Face ID system are tied to the unique logic board inside each iPhone X.
The flood illuminator works with the Face ID system and is tied to the unique logic board inside each iPhone X, so it failed after replacing.
More details about the conclusion please visit https://goowww.gletradesupply.com/1eu1niblog/can-iphone-x-face-id-still-work-after-repair/
Conclusion
To reassemble your device, follow these instructions in reverse order.

Инструменты

  • Suction Handle x1 added.
  • P2 Pentalobe Screwdriver iPhone x1 added.
  • Spudger x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Tweezers x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Metal Spudger x1 added.
  • Large Needle Nose Pliers x1 added.
  • Heat Gun x1 added.
  • Phillips PH000 Screwdriver x1 added.
  • iFixit Opening Tool x1 added.
  • Microfiber Cleaning Cloths x1 added.
  • Soldering Workstation x1 added.