Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения для iPad Pro 9.7" Display Assembly Replacement Введения

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений
Устройство
[ … ]iPad Pro 9.7"
Type
[ … ]replacement
Thing
[ … ]Display Assembly
Title
[ … ]iPad Pro 9.7" Display Assembly Replacement
Introduction
Follow this guide to remove and replace the display assembly for the iPad Pro 9.7". [ … ] '''Note''' that the home button assembly is paired to the iPad's logic board. In order to maintain Touch ID functionality, you must transfer your original home button to the new display assembly. This guide includes these steps.
Time Required Min
1 час
Time Required Max
2 часов
Imageid
До
После
Difficulty
Moderate
Conclusion
[ … ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Нет
Summary
[ … ]Remove and replace the display assembly for the iPad Pro 9.7". Also includes Home Button removal steps.

Руководство по Предпосылкам

Инструменты

  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks set of 6 x1 added.
  • Slip Joint Pliers x1 added.
  • Phillips #000 Screwdriver x1 added.
  • Battery Blocker x1 added.
  • Tweezers x1 added.
  • Spudger x1 added.
  • Plastic Cards x1 added.

Запчасти

  • iPad Pro 9.7" LCD Screen and Digitizer x1 added.
  • iPad Pro 9.7" Adhesive Strips x1 added.