Перейти к основному содержанию

Изменения для iPhone 8 Front Camera and Sensor Cable Replacement Введения

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений
Устройство
iPhone 8
Type
replacement
Thing
Front Camera and Sensor Cable
Title
iPhone 8 Front Camera and Sensor Cable Replacement
Introduction
Follow this guide to replace the front camera and sensor cable for your iPhone 8. This assembly includes the ambient light sensor and the microphone (?? is this true?)
Opening the iPhone 8 will damage the waterproof seals on the display. If you do not replace the adhesive seals, your phone will function normally, but will no longer be water-resistant.
Time Required Min
Нет оценки
Time Required Max
Нет оценки
Imageid
До
После
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, [guide|93983|reapply the display adhesive|new_window=true] and follow these instructions in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%208|iPhone 8 Answers community] for troubleshooting help.
Author
Public
Нет
Summary
Replace the front camera and sensor cable for the iPhone 8.

Руководство по Предпосылкам

Инструменты

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • iOpener x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.

Запчасти

  • iPhone 8/SE 2020 Display Assembly Adhesive x1 added.
  • iPhone 8 Front Camera and Sensor Cable x1 added.

Флаги

  • In Progress added.

Шаги

Step #: 1
До
После
Step #: 2
До
После
Step #: 3
До
После
Step #: 4
До
После