Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Изменения для Petnet SmartFeeder SF10E 12 Pin Connector Replacement Введения

Редактировать с помощью Ashley Kim -

Правка одобрена автор Ashley Kim

Удален
Добавлено
Без изменений
Introduction
Is your device not charging or is your SmartBowl not connecting properly? Well,Use this guide will help you to replace your damaged or stuck 12 pin connector. All you need in order to remove the pin connector if it is damaged and does not charge properly. When replacing the component, use a Phillips #1 screwdriver and iFixit Opening Tools to proceed with the replacement.
Is your device not charging or is your SmartBowl not connecting properly? Well,Use this guide will help you to replace your damaged or stuck 12 pin connector. All you need in order to remove the pin connector if it is damaged and does not charge properly. When replacing the component, use a Phillips #1 screwdriver and iFixit Opening Tools to proceed with the replacement.
Time Required Min
5 мин.
8 мин.
Time Required Max
7 мин.
10 мин.