Перейти к основному содержанию

Изменения для ZTE Blade Z Max Charging Port Card Replacement Введения

Отредактированно Ronald Weimar -

Правка одобрена автор Ronald Weimar

Удален
Добавлено
Без изменений
Устройство
[ ]ZTE Blade Z Max
Type
[ ]replacement
Thing
[ ]Charging Port Card
Title
[ ]ZTE Blade Z Max Charging Port Card Replacement
Introduction
[ ]The easiest way to replace any of the components on this board is to simply replace the entire board. Otherwise, you would have to desolder the faulty component and solder in a new one. This replacement can be done without removing the battery, but due to the nature of the parts being replaced, it is highly recommended that the battery is removed before attempting this replacement.
Time Required Min
55 мин.
Time Required Max
55 мин.
Imageid
До
После
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Нет
Summary
[ ]Replace the charging port card inside of your ZTE Blade Z Max. This includes the USB plug, 3.5mm headphone jack, and phone speaker.

Руководство по Предпосылкам

Инструменты

  • SIM Card Eject Tool x1 added.
  • Scotch tape x1 added.
  • iFixit Opening Picks set of 6 x1 added.
  • Screwdriver J000 Phillips Head x1 added.
  • T2 Torx Screwdriver x1 added.
  • Spudger x1 added.
  • iFixit Opening Tools x1 added.

Флаги

  • In Progress added.
  • Student In Progress added.

Шаги

Step #: 1
До
После
Step #: 2
До
После
Step #: 3
До
После
Step #: 4
До
После