Перейти к основному содержанию

Изменения для Shark DuoClean Powered Lift-Away Speed Power Cable/Connector Replacement Введения

Отредактированно Catie Halvorsen -

Правка одобрена автор Catie Halvorsen

Удален
Добавлено
Без изменений
Introduction
[ ]If your vacuum will not turn on and the power cable/connector is faulty, use this guide to replace the power cable/connector. You will need wire strippers, wire end caps, and the T10 and T20 Torx screwdrivers.

Инструменты

  • Wire stripper/crimping tool x1 added.
  • wire cap x1 added.
  • T10 Torx Screwdriver x1 added.
  • T20 Torx Screwdriver x1 added.