Перейти к основному содержанию

Изменения для Alpine MRV-M500 Electrolytic Capacitor Replacement Введения

Отредактированно Eric Gaulke -

Правка одобрена автор Eric Gaulke

Удален
Добавлено
Без изменений
Устройство
[ ]Alpine MRV-M500
Type
[ ]replacement
Thing
[ ]Electrolytic Capacitor
Title
[ ]Alpine MRV-M500 Electrolytic Capacitor Replacement
Introduction
[ ]Electrolytic capacitors are electronic components used to store energy. If too much current runs through a capacitor, it may become bulged and need to be replaced. To replace a capacitor on the MRV-M500 you will need previous experience soldering electronics.
Time Required Min
Нет оценки
Time Required Max
Нет оценки
Difficulty
Very difficult
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Нет
Summary
[ ]Replace bulged capacitors on the MRV-M500 circuit board.

Инструменты

  • Phillips 3 Screwdriver x1 added.
  • Soldering Iron x1 added.
  • Desoldering Braid x1 added.
  • Lead-based solder x1 added.

Запчасти

  • Electrolytic capacitor x1 added.

Флаги

  • In Progress added.
  • Student In Progress added.

Шаги

Step #: 1
До
После