Перейти к основному содержанию

​Вступительная история: Samsung Galaxy S8 Plus Rear Camera Bezel Replacement

Отредактированно Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений
Устройство
Samsung Galaxy S8 Plus
Type
replacement
Thing
Rear Camera Bezel
Title
Samsung Galaxy S8 Plus Rear Camera Bezel Replacement
Introduction
Use this guide to replace the rear camera bezel, including the glass camera lens cover , in your Samsung Galaxy S8 Plus.
If your replacement part does not come with adhesive mounted on it, you will also need to purchase adhesive for the rear camera bezel. You can buy pre-cut adhesive, or thin high-bond tape.
Time Required Min
40 мин.
Time Required Max
1 час
Imageid
До
После
Difficulty
Moderate
Conclusion
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20S8%20Plus|Answers community] for troubleshooting help.
Author
Public
Нет

Требования для руководства

Инструменты

  • iOpener x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Suction Handle x1 added.
  • Tweezers x1 added.
  • Spudger x1 added.
  • Microfiber Cleaning Cloths x1 added.
  • Isopropyl Alcohol x1 added.

Запчасти

  • Galaxy S8+ Rear Glass Panel/Cover x1 added.
  • Tesa 61395 Double-Sided Tape x1 Thin, high-bond tape is required if the replacement part does not come with adhesive. added.

Флаги

  • In Progress added.

Шаги

Шаг №: 1
До
После
Шаг №: 2
До
После
Шаг №: 3
До
После
Шаг №: 4
До
После
Шаг №: 5
До
После
Шаг №: 6
До
После
Шаг №: 7
До
После