Перейти к основному содержанию

Changes to Samsung Galaxy S Phone Custom-cut Adhesive Replacement Introduction

Edit by Arthur Shi

Правка одобрена автор Arthur Shi

Удален
Добавлено
Без изменений
Introduction
the adhesives adhesive strips in your back cover kit? You’ve come to the right place![br] [br] This guide shows how to use the back cover adhesive kit for the Galaxy S series with glass backs (S7 and higher). It also includes instructions on how to transfer and install various back cover components, such as the camera bezel and fingerprint sensor. [ … ] may or may not need to use all the adhesive strips included in the kit. If you are transferring the fingerprint sensor, you will need some high bond double-sided tape such as Tesa tape. [ … ] these, follow these here are some general guidelines: tips: [ … ] #* To make adhesive application easier, you can align the unexposed strips, [https://d3nevzfk7ii3be.cloudfront.net/igi/a6EfdSi3YTRDsMVw.large|then tape an edge down to hold the strip in place|new_window=true]. This will still allow you to peel away the plastic liners without losing alignment. * '''Peel away the clear plastic liner first'''. This layer usually peels easily. If there are multiple clear plastic layers, remove the clear layer that exposes adhesive. # * '''The exposed adhesive exposed after peeling the clear liner determines which surface the strip should be applied to first.''' Locate the surface that aligns with the exposed adhesive. # Carefully align and apply the adhesive to that surface. # Peel away any remaining clear liners as well as the colored liner. This will expose the other side of the adhesive strip adhesive.
the adhesives adhesive strips in your back cover kit? You’ve come to the right place![br] [br] This guide shows how to use the back cover adhesive kit for the Galaxy S series with glass backs (S7 and higher). It also includes instructions on how to transfer and install various back cover components, such as the camera bezel and fingerprint sensor. [ … ] may or may not need to use all the adhesive strips included in the kit. If you are transferring the fingerprint sensor, you will need some high bond double-sided tape such as Tesa tape. [ … ] these, follow these here are some general guidelines: tips: [ … ] #* To make adhesive application easier, you can align the unexposed strips, [https://d3nevzfk7ii3be.cloudfront.net/igi/a6EfdSi3YTRDsMVw.large|then tape an edge down to hold the strip in place|new_window=true]. This will still allow you to peel away the plastic liners without losing alignment. * '''Peel away the clear plastic liner first'''. This layer usually peels easily. If there are multiple clear plastic layers, remove the clear layer that exposes adhesive. # * '''The exposed adhesive exposed after peeling the clear liner determines which surface the strip should be applied to first.''' Locate the surface that aligns with the exposed adhesive. # Carefully align and apply the adhesive to that surface. # Peel away any remaining clear liners as well as the colored liner. This will expose the other side of the adhesive strip adhesive.
Time Required Min
10 мин.
Time Required Max
30 мин.
Conclusion
To reassemble your device, follow these instructions in reverse order.[ ]
To reassemble your device, follow these instructions in reverse order.[ ]
Summary
the rear glass back cover adhesive for glass backed Samsung's Galaxy S phones with glass backs. phones. Also includes instructions for back glass cover component adhesives.
the rear glass back cover adhesive for glass backed Samsung's Galaxy S phones with glass backs. phones. Also includes instructions for back glass cover component adhesives.

Инструменты

  • iOpener x1 added.
  • iFixit Opening Tools x1 added.
  • Tweezers x1 added.
  • Isopropyl Alcohol x1 added.