Перейти к основному содержанию

​Вступительная история: iPhone SE 2020 Taptic Engine Replacement

Отредактированно Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений
Устройство
iPhone SE 2020
Type
replacement
Thing
Taptic Engine Replacement
Title
iPhone SE 2020 Taptic Engine Replacement Replacement
Introduction
The Taptic Engine produces your iPhone's vibration and haptic feedback functions. Use this guide to remove and/or replace the Taptic Engine in an iPhone SE 2020.
'''Note:''' This guide instructs you to fully detach and remove the display assembly; this is intended to make the phone easier to work with and to prevent accidental damage to the display cables. If you feel comfortable removing the Taptic Engine while keeping the display cables attached, you can skip the steps for disconnecting the display.
Time Required Min
40 мин.
Time Required Max
1 час
Imageid
До
После
Difficulty
Moderate
Conclusion
'''To reassemble your device, [guide|93983|reapply the display adhesive|new_window=true] and follow these instructions in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%20SE%202020|iPhone SE 2020 Answers community] for troubleshooting help.
Author
Public
Нет

Требования для руководства

Инструменты

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • iOpener x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Standoff Screwdriver for iPhones x1 added.

Запчасти

  • iPhone 8/SE 2020 Vibrator x1 added.

Флаги

  • In Progress added.