Перейти к основному содержанию

Изменения для iMac Intel 24" EMC 2267 Graphics Card Replacement Введения

Редактировать с помощью Jeff Dickson -

Правка одобрена автор Jeff Dickson

До
После
Без изменений
Introduction
When the VRAM on my early-2009 24" iMac went bad, I feared I might need to trash the machine. Some sources suggested the video card was soldered to the logic board but that may only be true of the base-model iMac. The ones with the nVidia and ATI upgrades are repairable/upgradable as illustrated in this guide.
You'll need to open the iMac, disconnect all cables from the logic board, remove all retaining screws from the logic board, remove the logic board, then replace the video card.
Time Required Max
1 час
1 час
Conclusion
To reassemble your device, follow these instructions in reverse order. This is a good time to vacuum out all that accumulated dust too!