Перейти к основному содержанию

Изменения для iMac Intel 24" EMC 2267 Graphics Card Replacement Введения

Редактировать с помощью Jeff Dickson -

Правка одобрена автор Jeff Dickson

До
После
Без изменений
Устройство
iMac Intel 24" EMC 2267
Type
repair
Thing
Graphics Card
Title
Repairing iMac Intel 24" EMC 2267 Graphics Card
Introduction
When the VRAM on my early-2009 24" iMac went bad, I feared I might need to trash the machine. Some sources suggested the video card was soldered to the logic board but that may only be true of the base-model iMac. The ones with the nVidia and ATI upgrades are repairable/upgradable as illustrated in this guide.
You'll need to open the iMac, disconnect all cables from the logic board, remove all retaining screws from the logic board, remove the logic board, then replace the video card.
Time Required Min
1 час
Time Required Max
1 час
Imageid
До
После
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Нет
Summary
Illustrates successfully replacing the ATI Radeon 4850 HD graphics card.

Руководство по Предпосылкам

Инструменты

  • Phillips #0 Screwdriver x1 added.
  • Phillips #1 Screwdriver x1 added.
  • TR10 Torx Security Screwdriver x1 added.
  • T6 Torx Screwdriver x1 added.
  • TR8 Torx Security Screwdriver x1 added.

Запчасти

  • Replacement video card x1 added.

Флаги

  • In Progress added.
  • Member-Contributed Guide added.

Шаги

Step #: 1
До
После
Step #: 2
До
После
Step #: 3
До
После
Step #: 4
До
После
Step #: 5
До
После
Step #: 6
До
После
Step #: 7
До
После
Step #: 8
До
После
Step #: 9
До
После
Step #: 10
До
После
Step #: 11
До
После