Перейти к основному содержанию

​Вступительная история: iPhone 12 Front-Facing Cameras Replacement

Отредактированно Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений
Устройство
iPhone 12
Type
replacement
Thing
Front-Facing Cameras
Title
iPhone 12 Front-Facing Cameras Replacement
Introduction
Use this guide to remove and replace the front camera assembly (a.k.a. selfie cam) in an iPhone 12. Note that if you replace this part, '''Face ID will no longer work'''. This repair will restore a broken selfie cam to working order, but only Apple or an Apple “authorized” technician can restore Face ID.
Time Required Min
1 час
Time Required Max
2 час(ов)
Imageid
До
После
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2012|iPhone 12 Answers community] for help.
Author
Public
Нет

Требования для руководства

Инструменты

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • iOpener x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Suction Handle x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Phillips #00 Screwdriver x1 added.

Запчасти

  • Tesa 61395 Tape x1 added.

Флаги

  • In Progress added.

Шаги

Шаг №: 1
До
После
Шаг №: 2
До
После
Шаг №: 3
До
После
Шаг №: 4
До
После
Шаг №: 5
До
После
Шаг №: 6
До
После