Перейти к основному содержанию

Изменения для MacBook Pro 13" Two Thunderbolt Ports 2020 Lower Case Replacement Введения

Редактировать с помощью Carsten Frauenheim -

Правка одобрена автор Carsten Frauenheim

До
После
Без изменений
Устройство
MacBook Pro 13" Two Thunderbolt Ports 2020
Type
replacement
Thing
Lower Case
Title
MacBook Pro 13" Two Thunderbolt Ports 2020 Lower Case Replacement
Introduction
This serves as the starting point for every repair on your MacBook Pro. You'll need a P5 Pentalobe screwdriver to remove the lower case and get into the device.
'''For your safety, discharge your MacBook Pro's battery''' before you begin this procedure. A charged lithium-ion battery can create a dangerous and uncontrollable fire if accidentally punctured.
Time Required Min
5 мин.
Time Required Max
10 мин.
Imageid
До
После
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some basic [[Troubleshooting Problems After a Repair|troubleshooting|new_window=true]] or search our [link|https://www.ifixit.com/Answers/Device/MacBook%20Pro%2013%22%20Two%20Thunderbolt%20Ports%202020|Answers community] for help.
Author
Public
Нет
Summary
Remove the lower case on your 13" MacBook Pro (2020, two Thunderbolt 3 ports), either to replace it or to access the internals for further repair.

Руководство по Предпосылкам

Инструменты

  • P5 Pentalobe Screwdriver Retina MacBook Pro and Air x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.

Запчасти

  • MacBook Pro 13" (A2289 2020) Lower Case x1 added.

Флаги

  • In Progress added.