​Вступительная история: iPhone 13 mini Front Sensor Assembly Replacement

Устройство	iPhone 13 mini
Type	replacement
Thing	Front Sensor Assembly
Title	iPhone 13 mini Front Sensor Assembly Replacement
Introduction	This guide shows how to remove or transfer the front sensor assembly in your iPhone 13 mini. This assembly is affixed to the back of the display. You’ll need replacement adhesive to reattach components when reassembling the device.
Time Required Min	1 час
Time Required Max	2 час(ов)
Imageid	До После
Difficulty	Moderate
Conclusion	Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. ***To reassemble your device, follow the above steps in reverse order.*** Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%). Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Ask/iPhone+13+mini|new_window=true|iPhone 13 mini Answers community] for help.
Author	Adriana Zwink
Public	Нет

Требования для руководства

• #1 был empty но теперь iPhone 13 mini Pentalobe Screws Replacement.
• #2 был empty но теперь iPhone 13 mini Opening Procedure.
• #3 был empty но теперь iPhone 13 mini Display Assembly Replacement.

Инструменты

Запчасти

Флаги

Шаги

Шаг №: 1

До

После