|
Устройство |
|
|
Type |
|
|
Thing |
|
|
Title |
| iPhone SE 2022 Taptic Engine Replacement |
|
|
Introduction |
| Use this guide to remove the Taptic Engine in an iPhone SE 2022. | | | This guide was performed on the ***A2783*** (international) model. | | | ***Note:*** This guide instructs you to fully detach and remove the display assembly; this is highly recommended for easier handling and to prevent damage to the display cables. If you feel comfortable removing the Taptic Engine while keeping the display cables attached, you can skip the steps for disconnecting the display. | | | If you do not replace the adhesive seals when reassembling, your device will function normally, but will most likely lose its water protection. | | | You’ll need replacement adhesive to reattach components when reassembling the device. |
|
|
Time Required Min |
Нет оценки
|
|
Time Required Max |
Нет оценки
|
|
Difficulty |
Moderate
|
|
Conclusion |
| If possible, turn on your device and test your repair before installing new adhesive and resealing. | | | Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing. | | | ***To reassemble your device, follow these instructions in reverse order.*** | | | Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. | | | Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our Answers community for help. |
|
|
Author |
|
|
Public |
Нет
|