Перейти к основному содержанию

Изменения для iMac Intel 27" EMC 2546 Power Supply Replacement Введения

Отредактированно Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

Удален
Добавлено
Без изменений
Introduction
'''Before beginning any work on the power supply:''' Unplug the computer and press and hold the power button for ten seconds. [ … ] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
Conclusion
reverse order. and use our [guide|15624|Adhesive Strips Guide] to reattach the display glass.
reverse order. and use our [guide|15624|Adhesive Strips Guide] to reattach the display glass.

Руководство по Предпосылкам

Инструменты

  • T10 Torx Screwdriver x1 added.
  • Spudger x1 added.
  • iMac Intel 27" (2012-2017) Adhesive Strips x1 added.
  • Plastic Cards x1 added.
  • T9 Torx Screwdriver x1 added.

Шаги

Step #: 1
До
После
Step #: 2
До
После
Step #: 3
До
После
Step #: 4
До
После
Step #: 5
До
После
Step #: 6
До
После