Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения для Mac Pro Late 2013 Speaker Replacement Введения

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений
Introduction
The Mac Pro includes a small speaker on the IO board. Use this guide to remove and replace this speaker. [ … ] '''Before beginning any work on your Mac Pro:''' Unplug the computer and press and hold the power button for ten seconds to discharge the power supply's capacitors. [ … ] '''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
Summary
[ ]Remove the speaker from your Mac Pro Late 2013.

Инструменты

  • T4 Torx Screwdriver x1 removed.
  • Spudger x1 removed.
  • T10 Torx Screwdriver x1 removed.
  • T7 Torx Screwdriver x1 removed.
  • Tweezers x1 removed.
  • T5 Torx Screwdriver x1 removed.
  • T8 Torx Screwdriver x1 removed.