Перейти к основному содержанию

Изменения для MacBook Pro 13" Retina Display Mid 2014 I/O Board Replacement Введения

Отредактированно Sam Goldheart -

Правка одобрена автор Sam Goldheart

Удален
Добавлено
Без изменений
Устройство
[ ]MacBook Pro 13" Retina Display Mid 2014
Type
[ ]replacement
Thing
[ ]I/O Board
Title
[ ]MacBook Pro 13" Retina Display Mid 2014 I/O Board Replacement
Introduction
Replace the I/O, input/output, board in your MacBook Pro 13" Retina Display Mid 2014, including the SD card slot, the HDMI port and the right USB port. [ … ] This guide requires the removal of the heat sink. Don't forget to follow our [guide|744|thermal paste application guide] before you reinstall your heat sink.
Time Required Min
Нет оценки
Time Required Max
Нет оценки
Imageid
До
После
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Нет
Summary
[ ]Replace the I/O, input/output, board in a MacBook Pro 13" Retina Display Mid 2014.

Руководство по Предпосылкам

Инструменты

  • P5 Pentalobe Screwdriver Retina MacBook Pro and Air x1 added.
  • Spudger x1 added.
  • Arctic Silver ArctiClean x1 added.
  • Arctic Silver Thermal Paste x1 added.
  • Phillips #000 Screwdriver x1 added.
  • T5 Torx Screwdriver x1 added.
  • Tweezers x1 added.

Флаги

  • In Progress added.