Перейти к основному содержанию

Изменения для Apple Watch Force Touch Sensor Replacement Введения

Редактировать с помощью Andrew Optimus Goldheart -

Правка одобрена автор Andrew Optimus Goldheart

До
После
Без изменений
Introduction
Unfortunately, opening up your Apple Watch may damage the NFC antenna, which also serves as a gasketing seal. The antenna is made up of two layers, glued together. These layers may separate when you open your watch, which will compromise its seal after reassembly. If this happens, you'll need to repair or replace your antenna before reassembling your watch.
Be sure to follow our [guide|41083] guide when you're done.
Imageid
До
После
Difficulty
Moderate
Difficult
Conclusion
'''To reassemblecontinue reassembling your device, follow these instructions in reverse orderour [guide|41083] guide.'''

Руководство по Предпосылкам

Инструменты

  • Tri-point Y000 Driver Bit x1 added.
  • Curved Razor Blade x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • iOpener x1 added.
  • iFixit Opening Tool x1 added.
  • Tweezers x1 added.

Запчасти

  • Apple Watch (38 mm) Adhesive Strips x1 added.

Шаги

Step #: 1
До
После
Step #: 2
До
После
Step #: 3
До
После
Step #: 4
До
После
Step #: 5
До
После
Step #: 6
До
После
Step #: 7
До
После
Step #: 8
До
После
Step #: 9
До
После
Step #: 10
До
После
Step #: 11
До
После
Step #: 12
До
После
Step #: 13
До
После