Перейти к основному содержанию

Изменения для How to clean iRobot Roomba 4100 optical sensors to fix Circle Dance Введения

Редактировать с помощью Zachary Kaster -

Правка одобрена автор Zachary Kaster

До
После
Без изменений
Introduction
This guide will show you how to clean your iRobot Roomba 4100’s optical sensor. Cleaning the sensor is one way to fix a common problem known as the “Circle Dance”, which is caused by debris being on or near the bumper and cliff sensors. These sensors tell the Roomba to backup when they run into objects or come near cliffs, and when dirty they can cause your iRobot to continuously spin in a circle, aka the “Circle Dance“.
This guide will show you how to clean your iRobot Roomba 4100’s optical sensor. It should take about 15 minutes and is moderately difficult. You will need a Phillips head screw driver.

Флаги

  • Better Introduction removed.