Перейти к основному содержанию

Изменения для Repairing Viewsonic Optiquest Q9 Power supply repair capacitor replacement Введения

Отредактированно Philip Honnold -

На одобрении

Удален
Добавлено
Без изменений
Устройство
[ ]Viewsonic Optiquest Q9
Type
[ ]repair
Thing
[ ]Power supply repair
Title
[ ]Repairing Viewsonic Optiquest Q9 Power supply repair
Introduction
Signs of this problem coming on are a display that takes longer and longer to come on each time. Final failure is that it no longer shows a picture at all and the power LED on the front of the monitor just flashes. [ … ] Overview of what we are going to do is to remove the monitor stand from the back of the unit. Then pop open the case, remove some shielding from around the power supply so that it can be removed. Once removed we will de-solder 1 or 2 bad capacitors and replace them. Once this is done the monitor will be rebuilt.
Time Required Min
Нет оценки
Time Required Max
Нет оценки
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Нет
Summary
[ ]This repair guide will go into the steps needed to fix a 'flashing' power LED and the monitor will not show any display.

Флаги

  • In Progress added.
  • Member-Contributed Guide added.

Шаги

Step #: 1
До
После