Перейти к основному содержанию

Изменения для Retina MacBook 2015 Dual Microphone Assembly Replacement Введения

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений
Introduction
Use this guide to replace the dual microphone assembly in your Retina MacBook 2015.
'''To avoid logic board damage''', when your MacBook repair is complete ''but before powering it on'', [https://www.ifixit.com/Guide/Applying+Low+Voltage+After+Every+Repair+%28Retina+MacBook+2015+Only%29/107711|connect it to low-voltage power] using a 5-Watt iPhone charger and a USB-C to USB-A cable. These accessories are not included with your MacBook, so make sure you have them ready before you begin.
Conclusion
To reassemble your device, follow these instructions in reverse order. To avoid logic board damage, when your MacBook repair is complete ''but before powering it on'', [https://www.ifixit.com/Guide/Applying+Low+Voltage+After+Every+Repair+%28Retina+MacBook+2015+Only%29/107711|connect it to low-voltage power] using a 5-Watt iPhone charger and a USB-C to USB-A cable.

Запчасти

  • USB-C to USB-A Cable x1 added.
  • USB Power Adapter for iPhone and iPod x1 added.