Перейти к основному содержанию

Изменения для Craftsman Circular Saw Power Cord Repair Введения

Отредактированно Arthur Shi -

Правка одобрена автор Arthur Shi

Удален
Добавлено
Без изменений
Introduction
This is a common enough problem that I felt it warranted a repair guide- in addition, I wanted my trusted circular saw to get back into an operational condition. I didn't pay enough attention while working on a project and nicked the attached power cord. Needless to say, it never quite functioned the same after that- plus, the wiring would get super hot and occasionally arc! So it needed to be cut and re-spliced. [ … ] ''This repair procedure is meant to be used for devices that encounter residential or light-duty use. Do not follow this procedure if you are repairing a device used in an industrial or heavy-duty setting.'' [ … ] Keep in mind that this repair is working not only with a power tool, but also with a power cord that plugs into the wall. Be slow and careful with this repair to minimize the dangers involved.
This is a common enough problem that I felt it warranted a repair guide- in addition, I wanted my trusted circular saw to get back into an operational condition. I didn't pay enough attention while working on a project and nicked the attached power cord. Needless to say, it never quite functioned the same after that- plus, the wiring would get super hot and occasionally arc! So it needed to be cut and re-spliced. [ … ] ''This repair procedure is meant to be used for devices that encounter residential or light-duty use. Do not follow this procedure if you are repairing a device used in an industrial or heavy-duty setting.'' [ … ] Keep in mind that this repair is working not only with a power tool, but also with a power cord that plugs into the wall. Be slow and careful with this repair to minimize the dangers involved.
Summary
cord. This power cord had been mangled by the saw blade while I was too focused on making a precise cut. Here we showcase two different methods for reconnecting the cut copper wire strands.
cord. This power cord had been mangled by the saw blade while I was too focused on making a precise cut. Here we showcase two different methods for reconnecting the cut copper wire strands.

Флаги

  • Potentially Dangerous removed.