Перейти к основному содержанию

Изменения для MacBook Pro 13" Unibody Early 2011 Heat Sink Replacement Введения

Редактировать с помощью Andrew Bookholt -

На одобрении

До
После
Без изменений
Устройство
MacBook Pro 13" Unibody Early 2011
Type
installation
Thing
Heat Sink
Title
Installing MacBook Pro 13" Unibody Early 2011 Heat Sink
Introduction
Are the gobs of OEM thermal paste causing your MacBook Pro to be sluggish while hot? Use this guide to remove your heat sink to apply new thermal paste.
Time Required Min
Нет оценки
Time Required Max
Нет оценки
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Нет
Summary
Replace the heat sink or thermal paste on your Early 2011 MacBook Pro 13" Unibody.

Руководство по Предпосылкам

Инструменты

  • Phillips #00 Screwdriver x1 added.
  • Phillips #1 Screwdriver x1 added.
  • Spudger x1 added.
  • T6 Torx Screwdriver x1 added.

Флаги

  • In Progress added.