Перейти к основному содержанию

Изменения для Black and Decker LDX 120C Safety switch and trigger chip Replacement Введения

Редактировать с помощью Bradley -

Правка одобрена автор Bradley

До
После
Без изменений
Introduction
If the triggerGuide to replacing a stuck or thejammed safety switch on the drill is stuck or jammed. This guide will illustrate on how to solve this problem.trigger chip.
If the triggerGuide to replacing a stuck or thejammed safety switch on the drill is stuck or jammed. This guide will illustrate on how to solve this problem.trigger chip.
Conclusion
To reassemble your device, follow these instructions in reverse order.order, re-soldering wires where necessary.
To reassemble your device, follow these instructions in reverse order.order, re-soldering wires where necessary.
Summary
This guide will demonstrate a step by step process on how to fix theReplacement of safety switch and trigger chip as well as the safety switch.on Black and Decker LDX 120C drill.
This guide will demonstrate a step by step process on how to fix theReplacement of safety switch and trigger chip as well as the safety switch.on Black and Decker LDX 120C drill.

Инструменты

  • Wire cutters/side cutters x1 added.