Перейти к основному содержанию

Изменения для MacBook Pro 15" Unibody Late 2011 MagSafe DC-In Board Replacement Введения

Редактировать с помощью Matt Wiens -

На одобрении

До
После
Без изменений
Устройство
MacBook Pro 15" Unibody Late 2011
Type
installation
Thing
MagSafe DC-In Board
Title
Installing MacBook Pro 15" Unibody Late 2011 MagSafe DC-In Board
Introduction
Replacing the MagSafe DC-In board requires removal of the logic board.
Time Required Min
Нет оценки
Time Required Max
Нет оценки
Difficulty
Difficult
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Нет
Summary
Replace the MagSafe DC-In board on your Late 2011 MacBook Pro 15" Unibody.

Инструменты

  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.
  • T6 Torx Screwdriver x1 added.

Флаги

  • In Progress added.