Перейти к основному содержанию

Изменения для LG G6 Fingerprint Sensor Replacement Введения

Редактировать с помощью Adam O'Camb -

Правка одобрена автор Adam O'Camb

До
После
Без изменений
Title
LG G6 Rear GlassFingerprint Sensor Replacement
Introduction
Use this guide to replace a cracked or broken rear glass panelthe fingerprint sensor on your LG G6.
If your replacement part does not come with adhesive mounted on it, you will also need to purchase adhesive for the rear glass, rear button, and other small parts mounted on the rear glassfingerprint sensor. You can buy pre-cut adhesive, or thin high-bond tape.
Conclusion
After reapplying adhesive, follow these instructions in reverse order to reassemble your device.
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/LG%20G6|Answers community] for troubleshooting help.
Summary
Replace the rear glassfingerprint sensor on aan LG G6.

Запчасти

  • LG G6 Rear Glass Panel x1 (featured) removed.