Перейти к основному содержанию

Изменения для iPhone 7 Display Assembly Replacement Введения

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений
Устройство
iPhone 7
Type
replacement
Thing
Display Assembly
Title
iPhone 7 Display Assembly Replacement
Introduction
Use this guide if your new display assembly comes with the front-facing camera, sensor assembly, and display EMI shield already installed. If this is the case, remove the old display assembly and '''remember to transfer the home button to the new display assembly.'''
If your replacement display does not include those components, you must transfer them to your new front panel as well.
In both cases, the original home button must be transferred onto the new display in order for Touch ID to function.
Opening the iPhone 7 will damage the waterproof seals on the display. If you do not replace the adhesive seals, your phone will function normally, but will no longer be water-resistant.
[video|https://www.youtube.com/watch?v=WhEIsdG01Lw]
Time Required Min
30 мин.
Time Required Max
1 час
Imageid
До
После
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Да
Summary
Replace a cracked or faulty display assembly in an iPhone 7.

Инструменты

  • iFixit Opening Picks (Set of 6) x1 added.
  • P2 Pentalobe Screwdriver iPhone - Archived x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.
  • Spudger x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Tweezers x1 added.
  • Phillips #00 Screwdriver x1 added.

Запчасти

  • iPhone 7 Screen x1 (featured) added.
  • iPhone 7 Display Assembly Adhesive x1 added.
  • iPhone 7 Front Panel Assembly Cable Bracket x1 added.
  • iPhone 7/7 Plus Bottom Screws x1 added.
  • iPhone 7 Rear Camera Connector Bracket x1 added.
  • NuGlas Tempered Glass Screen Protector for iPhone 7 x1 added.

Шаги

Step #: 1
До
После
Step #: 2
До
После
Step #: 3
До
После
Step #: 4
До
После