Перейти к основному содержанию

Изменения для iPad Pro 12.9" Screen Replacement Введения

Редактировать с помощью Arthur Shi -

Правка одобрена автор Arthur Shi

До
После
Без изменений
Thing
Display Assembly
Screen
Title
iPad Pro 12.9" Display AssemblyScreen Replacement
Introduction
Follow the steps in this guide to replace the display assemblyscreen in an iPad Pro 12.9", or to access other internal components for servicing.
Note that the Home Buttonhome button installed in your original display assemblyscreen is paired to the iPad's logic board, and will need to be [guide|95750|removed and transferred to the new display|new_window=true]screen to retain Touch ID functionality.
***Before beginning, check to see if your replacement part has a daughterboard adhered to its back.*** If so, this guide will work for you. Otherwise, you will need to transfer the board from the old displayscreen to the new one. Transferring the daughterboard from the original to replacement unit will require specialty microsoldering equipment and we recommend DIY users source a new part rather than attempt the procedure.
Parts of this guide were shot with a Wi-Fi model and as such the internals may look slightly different from the LTE model. The procedure is the same for both models except where noted.
***Be very careful when you isolate the battery using a battery blocker.*** The battery contacts are easily damaged, resulting in irreversible damage. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.
The opening procedure for this iPad Pro is shown using a Halberd Spudger. If you don’t have one, ***you can use an opening pick instead***—the process is the same.
Imageid
До
После
Summary
Remove the display assemblyscreen, including the LCD, digitizer, and home button from an iPad Pro 12.9" to replace it or access internal components.

Руководство по Предпосылкам

Инструменты

  • Plastic Cards x1 added.
  • Phillips #00 Screwdriver x1 added.
  • iFixit Opening Tool x1 added.
  • Masking Tape x1 added.
  • Deck of Cards x1 added.
  • Isopropyl Alcohol x1 added.
  • Multipurpose Glue x1 added.
  • Battery Blocker optional x1 added.
  • iFixit Adhesive Remover (for Battery, Screen, and Glass Adhesive) x1 optional added.
  • Battery Blocker x1 removed.
  • Deck of Cards x1 Optional removed.

Запчасти

  • Precut Adhesive Card x1 added.
  • iPad Pro 12.9" Adhesive Strips x1 removed.
  • Tesa 61395 Tape x1 removed.

Флаги

  • Featured Guide added.

Шаги

Step #: 1
До
После
Step #: 2
До
После
Step #: 3
До
После
Step #: 4
До
После
Step #: 5
До
После
Step #: 6
До
После
Step #: 7
До
После
Step #: 8
До
После
Step #: 9
До
После
Step #: 10
До
После
Step #: 11
До
После
Step #: 12
До
После
Step #: 13
До
После
Step #: 14
До
После
Step #: 15
До
После
Step #: 16
До
После
Step #: 17
До
После
Step #: 18
До
После
Step #: 19
До
После
Step #: 20
До
После
Step #: 21
До
После
Step #: 22
До
После
Step #: 23
До
После
Step #: 24
До
После
Step #: 25
До
После
Step #: 26
До
После
Step #: 27
До
После
Step #: 28
До
После
Step #: 29
До
После
Step #: 30
До
После